Product Description: 3M4026 is 3M double sided tape in a double-sided adhesive foam substrate, the substrate is a polyurethane foam, adhesive type A-20 (is a high strength acrylic pressure sensitive adhesive), thickness of 1.6MM color is white, with superior viscosity, UV, solvent resistance is good, but also has a soft, paste service and good properties, high tensile strength, shear strength, high temperature, adhesive strength may vary with the natural aging greatly strengthened; green checkered release paper release paper, the method can be used for conventional fixed screws, rivets, spot welding replaced with double-sided adhesive tape to make the product surface is more smooth, beautiful, operation more simple, sealing better, more lasting effect, disassembly is very convenient. Performance: Item Test Method Test Unit static tensile shear strength of 1.24 MPa 22 ℃ 49 ℃ time when 2000 g 1000 g 1000 g when 66 ℃ 93 ℃ when 750 g density 0.29 g / cc elongation of 100% of the dielectric strength of 200-300 V / 0.025MM thermal conductivity of 0.062 watts / meter Kelvin good solvent resistance UV outstanding short-term temperature resistance of 104 ℃ 193 ℃ long shelf-life: at 21 ℃ and 50% relative humidity, original package Since the date of manufacture shelf life of 24 months. Applied Technology: With the adhesive bonding strength with the sticky surface contact area increases with increasing applied pressure helps to stabilize the adhesive contact with the sticky surface, thereby increasing the bonding strength. For best bonding results, the bonding surface must be clean, dry and tape applied optimal temperature range is 21-38 ℃, recommended if the initial bonding temperature below 10 ℃, suitable adhesive, so When the adhesive is too hard, and can not be firmly adhered to the object; however, if the adhesive already on, holding tack at low temperature also is satisfactory. Applications: 3M4026 double-sided adhesive in compliance with ROHS environmental regulatory requirements, suitable for indoor bonding adhesive if used outdoors, the tape should be protected from the environment to make it; for general installation and lightweight materials connection, such as the installation of air freshener, to soap, etc., can replace the traditional method of fixing screws, rivets, etc., thereby improving product aesthetics.